Raspberry Pi Kubernetes Cluster
In order to gain experience with a Kubernetes cluster or to be able to experiment with it, a functioning cluster is required. Since most conceptual challenges do not require a high performance test cluster, it is also sufficient to build a smaller and therefore more cost-effective one. For this reason I decided to set up a Raspberry Pi Kubernetes Cluster for testing purposes.
- 4x Raspberry Pi 3 Model B+
- 4x microSD Card (I’m using SanDisk Ultra 64GB)
- Power supply unit for the Raspberry Pi devices. You can also use any other 5V power source which provides enough current.
- 4 Micro USB cables for connecting the power suppy unit
- 4 Layer Acrylic Cluster Case
If the Raspberry Pis are not to be connected via WLAN but cable, the corresponding network components are also required:
- 5 Port Switch
- 4 short ethernet cables
The website of Hypriot has a very good tutorial how to set up a Kubernetes cluster with Raspberry Pi boards: https://blog.hypriot.com/post/setup-kubernetes-raspberry-pi-cluster/. If you need some configuration examples (executable on a Raspberry Pi Kubernetes Cluster) please check out my GitHub repository with configuration examples: https://github.com/MatthiasLohr/kubernetes-rpi-examples.
[…] VPS or using managed cloud providers such as AWS or GCE. Alternatively, you can use hardware, e.g. Raspberry Pis or bare metal servers. However, without the functionality provided by a managed cloud provider, it […]